Descargar Imprimir esta página

Patek Philippe GENEVE 24H-HOUR DISPLAY TRAVEL TIME Manual De Instrucciones página 7

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

CAUTION
Please wind the watch and set the time before
you put the watch on. This prevents lateral
pressure on the winding stem. Please use
your fingernails to pull the crown out and
turn it gently between two fingertips.
Never pull out the crown in a humid envi-
ronment or underwater: the water resist-
ance of your watch is assured only when
the crown is pushed home.
Your watch has two central hour hands
that move synchronously and can be either
superposed or separated in order to display
a second time zone.
The crown is used to move the local time
hand clockwise or counterclockwise in one-
hour steps.
If your watch has stopped running, rewind it
by hand before performing any corrections
or adjustments (about 10 clockwise turns of
the crown).
10
SETTING THE TIME
– HOME TIME
The reference time for your watch is the time at
home. To set the time, first pull the crown out to
position 2. Then, move the local time hand (solid
hour hand)
until the two hour hands (solid
and skeletonized ) are superposed. Now, pull the
crown gently all the way out to position 3 and move
the hour and minute hands in either direction until
the desired time is displayed. Once you have set the
correct time, push the crown home again. This will
set the small seconds hand in motion again (stop
second function).
11
3

Publicidad

loading

Este manual también es adecuado para:

31-260 ps fus 24h