Fig. 3D
Fig. 3E
Fig. 3F
Fig. 3G
Fig. 3H
5.3 Assemble the isolator key
1. Press the button (1) and lift the battery door.(2) (Fig. 4A/ Fig. 4B)
2.Insert the isolator key into the slot. (Fig. 4C).
Fig. 4A
Fig. 4B
Fig. 4C
5.4 Assemble the battery
1. Open the battery door.
2. Make sure the isolator key is switched off. Switch mark "1" is ON", "0" is "OFF". (Fig. 5A)
3. Insert the battery pack into battery holder, one or two battery is both workable. (Fig. 5B)
4. Make sure the latch on bottom of battery pack snaps in place and that battery pack is fully
seated. (Fig. 5C).
5. Close the battery door. (Fig. 5D).
9