Publicidad
Idiomas disponibles
Idiomas disponibles
USEFUL INFORMATION
At regular intervals the blade set should be removed and cleaned.
With a screwdriver remove the 2 screws retaining the fixed blade. Re-fit the
blade after cleaning as described below:
Brush our any hair stuck between the blades with a soft cleaning brush. Do not
use water or any other chemical to remove the lubricating grease from the bla-
des. It is not necessary to remove the top moving blade for cleaning.
Before fully tightening the 2 screws, adjust the taper lever to the lowest position
and align the blades so that the cutting edges are parallel to one another.
Tighten the 2 screws.
Note: If the blades are not correctly aligned, the cutting efficiency will be impai-
red. When not in use, unplug the clipper and store it out of reach of children in a
safe dry place. Never wrap the cord around the clipper as it will cause the cord to
wear prematurely and break.
DO not dispose of electrical appliances as unsorted municipal waste, use
separate collection facilities. Contact you local government for information
regarding the collection systems available. If electrical appliances are
disposed of in landfills or dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging your health and well-being,
When replacing old appliances with new ones,the retailer is legally obligated to take
back your old appliance for disposals at least free of charge. We reserve the right to
make amendments.
INGLÉS
13
Publicidad
