Publicidad
Idiomas disponibles
Idiomas disponibles
Displaying maximum and minimum temperature
1.
Press the MAX/MIN button
"MAX" lights up below the temperature unit (°C/°F)
temperatures of the indoor and outdoor unit appear on the display. After no more than
10 seconds the display switches back to the current measurement values.
2.
Press the MAX/MIN button
"MIN" lights up below the temperature unit (°C/°F)
temperatures of the indoor and outdoor unit appear on the display. After no more than
10 seconds the display switches back to the current measurement values.
3.
Press the MAX/MIN button
The currently measured temperatures of the indoor and outdoor unit are displayed.
Clearing the memory
1.
Press the MAX/MIN button
"MAX" lights up below the temperature unit (°C/°F)
2.
Press the CLEAR button
The saved maximum temperature values are deleted.
3.
Press the MAX/MIN button
"MIN" lights up below the temperature unit (°C/°F)
4.
Press the CLEAR button
The saved minimum temperature values are deleted.
Temperature unit
The digital remote pool thermometer can display the temperatures measured by the indoor
and outdoor unit in °C or °F.
Switch temperature unit
1.
Repeatedly press the °C/°F button
The temperature unit (°C/°F)
are displayed in the selected unit.
Additional outdoor units
The digital remote pool thermometer has 3 channels. This means that you can use one
indoor unit with up to 3 outdoor units. To do this, each outdoor unit must be set to a different
channel.
Setting the channel
1.
Open the housing of the outdoor unit
2.
Set the desired channel (CH1, CH2 or CH3) with the channel switch
3.
Close the housing of the outdoor unit
The set channel is displayed on the display of the outdoor unit.
22
.
3
.
3
.
3
.
3
.
5
.
3
.
5
.
6
switches between "°C" and "°F" and the temperatures
2
(see "Inserting or changing batteries").
12
.
12
. The measured maximum
2
. The measured minimum
2
.
2
.
2
21
(see Fig. D).
Publicidad
