Steinbach Digitales Funk Pool Thermometer Operación Manual página 24

Idiomas disponibles

Cleaning

Only clean the product with a standard bathroom cleaner, clear tap water and a lint-free

cloth. Aggressive cleaning agents can damage the product. Dry the product with a lint-free

cloth.

Storage

Clean the product as described in the section "Cleaning".

Stow away the product as soon as the outdoor temperature permanently falls below

+5°C to prevent damage through ice formation (frost burst).

The product is stowed away.

Troubleshooting

Error

Temperature display shows

"HH.H".

Temperature display shows

"LL.L".

Temperature display shows "--.-".

Outdoor unit shows "-50 °C" or

"ERROR"

If the problem cannot be solved, contact the customer service listed on the last page.

Possible cause and solutions

The measurement values are above the measuring

range.

The measurement values are below the measuring

range.

The signal from the outdoor unit is not being received.

see "Manual transmitter search"

The batteries of the outdoor unit are dead.

see "Inserting or changing batteries"

There is too much distance between the outdoor unit

and the indoor unit.

Position the stations closer to each other (max.

60 m/65 yds.)

Incorrect channel is set on the indoor unit.

see "Additional outdoor units"

Contacts on the circuit board are not properly aligned

- values are not transmitted correctly.

Open the housing of the outdoor unit and make

sure that the display screen is inserted as

described in the section "Inserting or changing

batteries" and that the housing of the outdoor

unit is locked correctly.