Publicidad
Idiomas disponibles
Idiomas disponibles
CARE AND MAINTENANCE
All maintenance should only be carried out by a qualified service technician.
10. Cleaning
Before cleaning or performing any maintenance, remove the battery pack from the tool.
For safe and proper operation, always keep the tool and its ventilation slots clean.
Always use only a soft, dry cloth to clean your nailer; never use detergent or alcohol.
11. Cleaning The Nail Channel
WARNING: Remove the battery pack and keep
the tool pointed away from you while cleaning the
nail channel.
NOTICE: Clean the nail channel regularly. Failure to
properly and regularly clean the channel will cause
premature failure or void the warranty.
a. Remove the battery pack from the tool.
b. Press the magazine release button (D) to open
the magazine (E), and then remove the nails
from the magazine.
c.
Lift the jam release latch (I) and open the jam
release (H).
d. Use a small amount of pneumatic tool oil on a clean cloth or cotton swab to wipe down the
nail channel.
e. Reload the nails and close the magazine.
11
14
Nail channel
H
I
Publicidad
