FoodSaver VS0100 Serie Guia De Inicio Rapido

VS0100 SERIES QUICK START GUIDE
FoodSaver PowerVac
®
MAKE A FOODSAVER
1. Using scissors, cut enough
bag material from roll to
hold item, plus 3 inches
(7.62 cm).
2. Insert one end of bag
material across Sealing
Strip.
3. Press Lid to lock. Dry
Mode Light will illuminate
when the Lid is fully locked
and ready to Operate.
4. Press Seal Button.
5. When Seal Indicator
Light stops flashing and
becomes constant, sealing
is complete. Press Lid
Release Buttons to open
Lid.
VACUUM SEAL FOODSAVER
ZIPPER BAGS:
1. Prepare Zipper Bags
according to FoodSaver
Accessory Guidelines,
which are included with
accessory purchases. For
Zipper Bags, make sure
not to put any food under
the valve and press zipper
closed with finger while bag is lying down on a flat
surface.
2. Press Lid to lock. Dry Mode Light will illuminate when
Lid is fully locked and ready to operate.
3. Insert one end of the Accessory Hose into Accessory
Port on Appliance until it clicks into place. Place
Handheld Sealer on Zipper Bag valve.
4. Press Vacuum Button.
Zipper bags are safe for pantry and fridge use only.
p. 1
VS0100_22EFSQSG1 (digital).indd 1 VS0100_22EFSQSG1 (digital).indd 1
Vacuum Sealer
TM
BAG:
®
Place Bag on Sealing Strip
Close and lock Lid
Press Seal Button
®
(sold separately)
®
HOW TO:
VACUUM SEAL A FOODSAVER
1. Place item(s) in bag, allowing
at least 3 inches (7.62 cm) of
space between bag contents
and top of bag.
2. Open Appliance Lid and
place open end of bag into
Vacuum Channel (Drip Tray).
3. Press Lid to lock. Dry Mode
Light will illuminate when Lid
is fully locked and ready to
Operate.
4. Press Vacuum Button to begin
vacuum and sealing process.
Motor will continue to run
until bag is fully vacuumed,
then will automatically seal.
5. When Seal Indicator Light
stops flashing and becomes
constant, press Release
Buttons on both sides to
open. Remove bag.
Refrigerate, freeze or store as
needed.
VACUUM SEAL FOODSAVER
CONTAINERS:
1. Prepare FoodSaver
& Marinate Container
according to Guidelines,
which are included with
container purchase.
2. Press Lid to lock. Dry Mode
Light will illuminate when Lid
is fully locked and ready to
operate.
3. Insert one end of Accessory Hose into Accessory Port
on Appliance. Place Handheld Sealer on Container valve.
4. Press Vacuum Button.
To release vacuum and open, turn knob on lid to Open.
See Owner's Manual for full instructions and safeguards.
Français Español
p. 2 p. 3
®
Place Bag in Vacuum Channel
Close and lock Lid
Press Vacuum Button
®
(sold separately)
Preserve
®
BAG:
2022/4/11 上午8:47 2022/4/11 上午8:47