Publicidad
Idiomas disponibles
Idiomas disponibles
When operating on Auto mode:
-
When you set the air conditioner to AUTO
mode, it will automatically select cooling
or fan only operation depending on what
temperature you have selected and the
current room temperature.
-
The air conditioner will control room
temperature automatically according to
temperature you've set.
-
The fan speed is automatically controlled
based on the temperature setting and room
temperature and cannot be adjusted.
When operating on Fan Only:
-
Use this function when cooling is not
desired, such as for room air circulation or to
exhaust stale air (on some models, remember
to open the vent during this function, but
keep it closed during cooling for maximum
cooling efficiency.) You can choose any fan
speed you prefer.
-
During this function, the display will show
the actual room temperature, not the set
temperature as in the cooling mode.
-
In Fan Only mode, the temperature is not
adjusted.
When operating on Dry mode:
-
In this mode, the air conditioner will generally
function as a dehumidifi er. Since the
conditioned space is a closed or sealed area,
some degree of cooling will occur.
TIMER: AUTO START/STOP FEATURE:
-
When the unit is on, press the Timer button.
The "Timer off " LED indicator light will
illuminate indicating the Auto stop feature
has been activated.
-
When the unit is off , press the Timer button.
The "Timer on" LED indicator light will
illuminate indicating the Auto start feature
has been activated.
-
When the time of TIMER ON is displayed,
press the Timer button again. The TIMER OFF
indicator light illuminates. It indicates the
Auto Stop program has initiated.
-
Press or hold the UP (
button to change the Auto time by 0.5 hour
increments, up to 10 hours, then at 1 hour
increments up to 24 hours. The control will
count down the time remaining until start.
Page 14
) or DOWN (
)
-
The selected time will register in 5 seconds,
and the system will automatically revert back
to display the previous temperature setting or
room temperature when the unit is on. (when
the unit is off , there is no display.)
-
Turning the unit ON or OFF at any time or
adjusting the timer setting to 0.0 will cancel
the Auto Start/Stop timed program.
NOTICE
To cancel timer operation, press and hold the
timer button for 2 seconds until the beep/
buzzer is heard.
Displays
DISPLAYS
DISPLAYS:
Shows the set temperature in "°C" or "°F" and the
Auto-timer settings. While on Fan Only mode, it shows
the room temperature. If the room temperature is too
high or low, it will display"HI" or "LO".
Error codes:
AS - Room temperature sensor error - Unplug the
unit and plug it back in. If error repeats, call
for service.
ES - Evaporator temperature sensor error -
Unplug the unit and plug it back in. If error
repeats, call for service.
NOTICE
• To change the AC between Celsius and
Fahrenheit scales, press the temperature
control arrows at the same time for 5 seconds.
• If the unit shuts off unexpectedly due to the
power outage, it will restart with the previous
function setting automatically when the
power resumes.
User Manual
Publicidad
