Descargar Imprimir esta página

CEVIK PRO R8/40 Manual De Instrucciones página 15

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
INTRODUCTION.
We are grateful for the trust given to our Brand and we hope that the Air Nailer you have just
bought will be very useful for you. This Nailer has many characteristics that will make your job
faster and easier. Concepts such as Safety, comfort and reliability have been identified as
priorities in product design.
GENERAL SAFETY RULES.
OBLIGATION AND SECURITY PICTOGRAMS:
Only qualified and trained operators can install, adjust or use the Nailer.
Do not modify the Nailer. Modifications can reduce the effectiveness of safety measures
and increase risks for the operator.
Do not throw away the safety instructions; hand them over to the operator.
Do not use the Nailer if it has been damaged.
Pneumatic Nailers should be inspected periodically to verify that there are no unwanted air
leaks.
To avoid risks, read, understand, and save these safety instructions before
installation, operation, repair, maintenance, accessory change, or
working with the Nailer. Failure to do so can lead to serious bodily injury.
Both the Nailer operator and people in the work area must wear hearing
protectors.
Both the operator of the Nailer and people in the work area must use eye
protection.
This Nailer only works when it is in contact with the material to be nailed.
Its use is intended for applications on doors, panels, windows, fences,
cabinets, shelves, skirting boards, pallets, furniture, upholstery, coatings,
etc.
Warning that the tool should only be used in safe workplaces.
Remove your finger from the trigger when lifting the Nailer, moving
between operating areas and positions, or walking, as resting your finger
on the trigger can cause accidental operation.
Use only compressed air to drive the Nailer. Do not use any other type
of gas.
15

Publicidad

loading