Descargar Imprimir esta página

CEVIK PRO R8/40 Manual De Instrucciones página 20

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
In case of transport and / or storage, the Nailer must not be exposed to temperatures
outside the range: -25ºC to + 55ºC, rain or wet areas.
In the event of a malfunction or breakdown, do not attempt to repair it unless you have the
appropriate technical skills and tools. Contact one of our technical services, which you will
find on our website www.grupocevik.es.
Maintenance or repair performed by unauthorized technical services will void and
terminate the manufacturer's warranty.
WARRANTY.
Period: The warranty period is 24 months, for endusers who do not use the product into a
professional activity. If the product is used into a professional activity or industrial process the
guarantee period will be 12 months.
Limited warranty: Warranty obligates to manufacturer CEVIK S.A. to repair or replace, free of
charge, all components subjected to verified manufacturing defects. It will be CEVIK´s Technical
Service responsibility to repair/replace the components in a short period of time, according to
the internal commitments of service.
Warranty shall not include:
- Consumables.
- Cause damages to persons, other living entities and objects was subject to abuse, improper
use not conforming to product manual instructions, or environment conditions more severe
than those specified in the manual and specification.
Warranty expiration:
- After warranty period of 24/12 months, from the date of purchase.
- Instructions contained in this manual have not been observed.
- If an unsuitable or incorrect use of product has been confirmed.
has been modified or repaired by any unauthorized service center or personnel
- Product
ENVIRONMENTAL PROTECTION.
this product must not be disposed together with household garbage. If the
welding helmet is not any longer in use it must be disposes of properly in
accordance with the established collection system at your area for this kind of
product.
Waste separation of used product and packaging allows material recycling for
re-use. This process helps to avoid environmental pollution and reduce the
demand of raw materials.
These are original instructions.
20
.

Publicidad

loading