Descargar Imprimir esta página

Kobalt KTSH 124B-03 Manual De Instrucciones página 21

Publicidad

TROUBLESHOOTING
WARNING
Turn the tool off and detach the battery pack before performing troubleshooting procedures.
PROBLEM
The tool does not
work.
Strong vibration or
loud noise during
operation.
Motor overheating.
The cut-off wheel
binds or smokes from
friction.
The cut-off wheel
does not follow a
straight line.
WARRANTY
For 5 years from the date of purchase, the power tool is warranted and for 3 years from date of
purchase the battery & charger are warranted for the original purchaser to be free from defects
in material and workmanship. This guarantee does not cover damage due to abuse, normal
wear, improper maintenance, neglect, unauthorized repair/alteration, or expendable parts and
accessories expected to become unusable after a reasonable period of use.
If you think your product meets the above guarantee criteria, please return it to the place of
purchase with valid proof of purchase and the defective product will be repaired or replaced at
no charge. This guarantee gives you specific legal rights, and you may also have other rights
that vary from state to state.
POSSIBLE CAUSE
Battery pack is depleted.
Cut-off wheel is not
installed securely.
Cooling vents are
obstructed.
Cut-off wheel is dull.
Cut-off wheel is on
backwards.
Workpiece is not properly
supported.
Incorrect cut-off wheel is
being used.
Cut-off wheel is dull.
CORRECTIVE ACTION
Charge the battery pack.
Reinstall the cut-off wheel according
to chapter "Installing or changing
the cut-off wheel".
Clean and clear the cooling vents.
Do not cover vents with hand during
operation.
Replace with a new cut-off wheel.
Install the cut-off wheel correctly.
Clamp the workpiece correctly and
tightly.
Use the correct cut-off wheel.
Replace with a new cut-off wheel.
21
Lowe's Home Centers LLC.
Mooresville, NC 28117
Printed in China

Publicidad

loading

Este manual también es adecuado para:

49635614963560