Publicidad
Idiomas disponibles
Idiomas disponibles
A
Product overview
Presser foot bar - Secures the presser foot support and presser foot. It can be
raised and lowered via the presser foot lifter.
Spool pin with spool cap - Secures the spool of thread in place by means of the
spool cap, thus allowing the upper thread to unwind without too much or little
tension. The spool pin can be used horizontally or vertically, depending on the
size of the spool of thread.
Spool of thread - Holds and feeds the upper thread to the tension discs. The
diagram on the top of the machine indicates how the upper thread should pass
through the thread guide.
Free arm - Allows you to sew sleeve or trouser hems, necklines or other small
openings in clothing. Remove the extension to access the free arm.
Foot control input - Located at the back of the machine. Connect the foot
control to this input before starting to sew.
AC adapter input - Located on the back of the machine. Connect the AC adapter
(supplied) to this inlet.
Foot control - Used to start and stop the machine. Press down on the pedal
with your foot to start sewing and take your foot off the pedal to stop sewing.
AC Adapter - One end plugs into the machine's power inlet and the other plugs
into the mains socket.
2 x spools of thread
2 x bobbins
1 x needle threader
1 x needle
1 x automatic buttonhole foot
1 x buttonhole foot
38
EN
Publicidad
