Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
•
Set the stitch selection dial to a straight stitch (stitches No. 1-4), depending on the fabric
being sewn.
•
Position the fabric under the presser foot, just level with the inside of the fabric's top
raw edges.
•
Lower the presser foot and sew approximately 3 stitches.
•
Stop sewing, then hold down the reverse lever, located at the front of the machine. Keep
it pressed while you reverse stitch 3 stitches.
Note: The reverse stitch length is pre-set, regardless of the selected stitch.
•
Release the reverse lever and sew forwards again, until you reach the opposite end of
the fabric.
•
Hold the reverse lever down to sew approx. 3 reverse stitches again.
•
Release the lever to sew forwards again until you reach the end of the fabric.
•
Raise the presser foot lifter, then remove the fabric from the machine.
55
EN
Publicidad
