Descargar Imprimir esta página

Blomberg BRFB21612 Serie Manual Del Usuario página 11

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation
3
WARNING
cord must be replaced by the
Authorized Service Agents.
WARNING
failure, it should not be operated
unless it is repaired by the Authorized
Service Agent! There is the risk of
electric shock!
3.5 Adjusting the feet
After moving the refrigerator into place, we recommend
lowering the feet to secure the product in place. You can
also adjust the feet if the product is not balanced. Twist
the feet in the desired direction according to the
illustration below.
WARNING
product. Product must not be
plugged in when adjusting the feet.
There is the risk of electric shock!
3.6 Illumination lamp
Do not attempt to repair yourself but call the Authorized
Service Agent if the LED lights do not go on or are out of
order. The lights used in this appliance is not suitable for
household room illumination. The intended purpose of
this lights is to assist the user to place foodstu s in the
refrigerator/freezer in a safe and comfortable way.
3.7 Door/Drawer Open Warning
An audio warning signal will be given when the
door of your product is left open for 1 minute. This
warning will be muted when the door is closed.
: Damaged power
: If the product has a
: First unplug the
3.8 Transportation of the product
1. Unplug the product before transporting it.
2. Remove water connections.
3. Secure the shelves, accessories, crisper and etc. in
the refrigerator by adhesive tape before repackaging it.
Packaging must be tied with thick tape
or strong ropes and the rules of
transportation printed on the package
must be followed.
WARNING
are dangerous for the children. Keep
packaging materials in a safe place
away from reach of the children.
Points to be paid attention to when the
relocation of the refrigerator
1. Your refrigerator should be unplugged.Before
transportation of your refrigerator, it should be
emptied and cleaned.
2. Before it is re-packaged, shelves, accessories, crisper,
etc. inside your refrigerator should be xed with
adhesive tape and secured against impacts. Package
should be bound with a thick tape or sound ropes
and the transportation rules on the package should
be strictly observed.
3. Original packaging and foam materials should be
kept for future transportations or moving.
8
EN
: Packaging materials

Publicidad

loading

Este manual también es adecuado para:

Brfb21622 serie