Publicidad
Idiomas disponibles
Idiomas disponibles
ESP / CAT /
ENG
/ POR
FUNCTION INSTRUCTIONS
1)
Remove the flange to unwind the cable.
2)
Make sure the Mist diffuser is unplugged.
3)
The Mist diffuser has markings (lines) that indi-
cate the minimum and maximum water level. Fill
the container with clean mineral water up to the
maximum level mark. Do not exceed. If the water
is very hard, mineral water is recommended.
4)
Add between 3 and 6 ml. of Boles d'olor Perfu-
me Mists according to the desired intensity. En-
sure to clean and dry immediately any Mist drops
that might have fallen out of the container or its
outer wall. Wash hands thoroughly after handling
the Mists.
5)
Place the lid perfectly, making sure it is proper-
ly placed on the container base and plug the Mist
Diffuser. To start simply press the top button on/
off. The diffusion will start automatically.
6)
Do not use for more than 8 consecutive hours.
After this time, turn it off and wait for at least 1
hour.
7)
If the water level reaches the minimum, re-fill
with water and add 1 or moreessential oils or Per-
fume Mist measures, depending on the desired
intensity.
8)
Press again the on/off button to turn off the
INSTRUCCIONES / INSTRUCCIONS /
Mist diffuser and stop spreading the fragrance.
9)
If not in use for more than 48 hours, drain the
remaining water and clean the appliance. If after
a few days it still has liquid, drain, clean the unit
with cold water and it will be ready for reuse.
10)
Before cleaning, unplug it from the mains.
Remove the top cover and empty any water ma-
king sure not to make any contact with electrical
parts. If, while cleaning, the inside of the top
cover gets wet, let it dry for a few hours for safety.
11)
Use only a paper towel or a soft sponge
soaked with water to clean. Dry top fan cone
with a paper towel.
12)
From time to time, it is convenient to let it
work with mineral water and a few drops of vine-
gar or lemon juice to avoid calcifications.
INSTRUCTIONS
/ INSTRUÇÕES AMBIENTS
Publicidad
