Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
Push twenty-four HIDDEN CAMS (1F) into the ENDS (A),
å
UPRIGHTS (B and C), TOP (D) and BOTTOM (E). Then,
insert the metal end of a CAM DOWEL (2F) into each
HIDDEN CAM, except in the fi ve edges called out below.
2F
(12 used)
(24 used)
Do not insert
CAM DOWELS
into this edge.
Arrow
Hole
The arrow in the HIDDEN
CAM must point toward the
hole in the edge of the board.
www.sauder.com/services
Arrow
1F
D
Arrow
Do not tighten the HIDDEN CAMS in this step.
B
E
1F
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
414958
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
C
A
Arrow
A
Do not insert
CAM DOWELS
into these edges.
Page 5
Publicidad
