Burley Flatbed Manual De Instrucciones Y Seguridad Del Propietario página 6

Unfolding Your Trailer Folding Your Trailer Mounting the Reflectors
1
1 1
remove side rail lockpins, remove side rails
Slide end of side rail into side rail mount and Mount clear reflectors/brackets horizontally
from side rail mounts, and fold flat.
secure using lockpin. repeat for all four corners. on front corners of side panel rail tubes.
Mount red reflectors/brackets horizontally
on rear corners of side panel rail tubes
Installing the Tow Bar
1 2
Slide tow bar into receiver Insert lock pin through holes. close
on left side of trailer. retainer to secure lock pin.
6
ASSEMBLY & uSE ENG DEU FRA ESP BURLEY.COM