TM Electron TMPPL010 Manual De Instrucciones página 15

www.tmelectron.com
steam button briefly. Allow a short pause between shotos. Be sure to fully
depress the shot of stream button.
Iron is leaking
The variable steam control must be set on, until the iron is hot. The tempera-
ture setting is too low to produce steam. Shot of setam was used too much,
so allow iron to re-heat.
9. Cleaning
1. Disconnect the appliance from the mains, before cleaning.
2. Do not use solvents or abrasive products to clean the iron, clean with a
damp cloth.
15
ENGLISH