Descargar Imprimir esta página

Oase Water Jet Lightning Instrucciones De Uso página 14

Ocultar thumbs Ver también para Water Jet Lightning:

Publicidad

Idiomas disponibles

Idiomas disponibles

Operation
The control box is operated by radio via a 2-channel hand-held transmitter.
The hand-held transmitter has a range of max. 260 ft (80 m). Obstacles between hand-held
transmitter and control box, a low battery in the hand-held transmitter or electro-magnetic ra-
diation of electrical equipment will impair the range.
When the control box is switched on (power plug inserted), the hand-held transmitter can be
used to sequentially select 4 pre-programmed water feature images. After switching on the unit,
program 1 is automatically activated.
• Button 1: Selecting the next program.
• Button 2: Selecting the previous program.
Teach-in hand-held transmitter
The hand-held transmitter included in the scope of delivery is taught in for the control box. A
maximum of 10 hand-held transmitters can be set to the control box.
If you want to register another hand-held transmitter to the control box, proceed as follows:
You can only log out all hand-held transmitters known to the control box together, not indi-
vidual ones. To log out all hand-held transmitters, press the teach-in button for approx. 5
seconds.
14
Programs
P0
Unit off, stand-by mode
P1
Constant water jet, continuous white light
P2
Constant water jet, colored light change/colored continuous light
• Press buttons 1 and 2 simultaneously to set the current color permanently.
• Press buttons 1 and 2 simultaneously again to set the light change.
P3
Pulsating water jet, continuous white light
P4
Pulsating water jet, colored light change/colored continuous light
• Press buttons 1 and 2 simultaneously to set the current color permanently.
• Press buttons 1 and 2 simultaneously again to set the light change.
Teach-in hand-held transmitter:
1. Press the teach-in button on the control box with a
pointed object (pen, bent paper clip, etc.) for approx. 1
second.
The control box is now in teach-in mode for 3 seconds.
2. Press any button on the hand-held transmitter for ap-
prox. 1 second within the 3 seconds.
The control box can now be operated with the new
hand-held transmitter.

Publicidad

loading