Safety Instructions - Makita 6722DW Manual De Instrucciones

SAFETY INSTRUCTIONS

WARNING:
When using battery operated tools basic safety precautions, including the
following, should be followed to reduce the risk of fire, leaking batteries and
personal injury: Read these instructions before operating this product and save
these instructions.
For safe operation:
1. Keep work area clean.
Cluttered areas and benches invite injuries.
2. Consider the work environment.
Do not expose the tool to rain. Keep work area well lit. Do not use tools in the presence of
flammable liquids or gases.
3. Keep children away.
Do not let visitors touch the tool. Keep visitors away from work area.
4. Store batteries or idle tools.
When not in use, tools and batteries should be stored separately in a dry, high or locked up
place, out of reach of children.
Ensure that battery terminals cannot be shorted by other metal parts such as screws, nails,
etc.
5. Do not force the tool.
It will do the job better and safer at the rate for which it was intended.
6. Use the right tool.
Do not force small tools or attachments to do the job of a heavy duty tool. Do not use tools for
purposes not intended.
7. Dress properly.
Do not wear loose clothing or jewellery, they can be caught in moving parts. Non-skid
footwear is recommended when working outdoors. Wear protecting hair covering to contain
long hair.
8. Use protective equipment.
Use safety glasses and if the cutting operation is dusty, a face or dust mask.
9. Connect dust extraction equipment.
If devices are provided for the connection of dust extraction and collection ensure these are
connected and properly used.
10. Do not abuse the supply cord (if fitted).
Never carry the tool by the cord or yank it to disconnect from the socket. Keep the cord away
from heat, oil and sharp edges.
11. Secure the work.
Use clamps or a vice to hold the work. It is safer than using your hand and it frees both hands
to operate the tool.
12. Do not over-reach.
Keep proper footing and balance at all times.
4
ENA002-2