Qilive Q.5593 Manual Del Usuario página 10

2. TECHNICAL SPECIFICATIONS
EN
Battery type
High precision sensors / division
Maximum load
Unit conversion
Water division
Body fat division
Age range for body fat
Height range
Height unit
3. PRODUCT DESCRIPTION
1. LCD display
2. Electrodes
3. Platform
4. USE
4.1 Inserting batteries
The unit operates on three AAA (R03) batteries.
• Lo: Low battery warning, replace the batteries.
4.2 Initializing the scale
1. Place the scale on the hard, stable, flat, solid, non-slippery surface (no carpet or
uneven floors).
2. Press down on the center of the platform with your foot, then lift your foot off.
3. "0.0" will display.
4. Once the scale shuts down, it is ready to use.
4.3 Creating and saving the profile
This body composition scale can store the personal details of up to ten people. These
details will be stored until they are edited. The information is required for a more accurate
measurement.
1. To turn the scale on, press down on the center of the platform with your foot, then lift
your foot off.
2. When the display shows "0.0", press the SET button to activate the setup procedure.
3. Select a user number between P01 and P10 by pressing the
buttons. Press the SET button to confirm and go to the next
parameter.
4.5 V , 3 x AAA (R03) 1,5 V
100 g increments (0.1 kg / 0.2 lb / 1/4 lb)
180 kg / 396 lb / 28 st 4 lb
Kilogram (kg), Stone (st), Pound (lb)
0.1%
0.1%
6-100 years
80-220 cm
cm / ft-in
4. Up selection indicator
5. Set button
6. Down selection indicator
10
or