TRAPP TR 200 Manual De Instrucciones página 27

www.trapp.com.br
Due to the constant vibration of the equipment, the

natural tendency with time is for screws to loosen.
Therefore, a periodical check is recommended, and
if necessary tighten the screws. Tighten with caution
so as not the strip screw thread.
Access to the Blades - TR 200 and TR 200G
1
2
3
Tightening
4
Image merely illustrative
Attention!
Turn off shredder and remove electrical
plug from outlet before cleaning or
servicing.
To have access to the blades, proceed as described
below:
Loosen the knob (1), spring washer (2) and flat

washer (3).
Now join the feeding funnel (4) to access the blades.

27