Tips & Tricks - Tribest Shine Kitchen SJV-107 Manual De Funcionamiento

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

We are so happy to welcome you to the #juicetribe!
Please take a moment to read through this quick start guide before you move on to the
assembly instructions so you can enjoy the best operation of your new tool for healthy
living! For the best juicing experience:
Safety
switch
• We recommend cutting your fruits and vegetables into 1-2 inch small pieces before
feeding them into the chute. While it seems like more upfront time to chop then juice,
it will save time while juicing and produce a higher volume of juice from your produce.
• Your included apple slicer and cleaning brush are located on the back side of your
packaging insert. Please be sure to flip your packaging over in order to take out these
utensils.
• While juicing, feed in produce then watch for the pulp to extract out of the front of the
machine. Do not force the machine to work faster by overfeeding the machine. You
may feed the juicer continuously, but always ensure the pulp is coming out at the
same rate of your feeding. If the pulp is not coming out at the same rate, pause
your juicing and use the reverse feature to ensure there is no produce blocking the
feeding chute or pulp extraction. After doing this, you may resume juicing at a regular
rate.
• It is simple to clean your machine after juicing by first running water through the
chute with the machine on. This will push out most of the remaining pulp and make
cleaning easier.
• To clean, twist off the entire top portion of your juicer and carry it to the sink. For best
results, rinse each part right away with warm soapy water. This process should
take 3-5 minutes. Your cleaning brush can help you quickly remove any pulp fiber
that is attached to the screen. Take special care to remove the pressure plug from
the bottom of the auger housing to clean it. Then place it back to ensure it does not
become separated from your juicer between uses.
• Your machine is equipped with overheating protection. This machine has a compact
motor that is designed to run for 10 minutes continuously. If your motor starts
to heat up, it will automatically shut off until it cools back down in order to prevent
damage to the motor by overheating. Wait until the machine cools down before
resuming any juicing activity.
• We offer replacement parts and additional juicing accessories at
www.shinekitchen.co. If you need support or special shipping options, please contact
our customer service center at 1-888-254-7336.
• Your juicer will not turn on unless the safety
switch is completely engaged. To do this, please
be sure to follow the assembly instructions on the
following pages completely to ensure the safety
switch is completely engaged.
3. TIPS & TRICKS
EN
7

Publicidad

Tabla de contenido
loading

Tabla de contenido