Troubleshooting - Tribest Shine Kitchen SJV-107 Manual De Funcionamiento

The motor does
• Check that the power cord is plugged into a working socket.
not turn on.
• Check that all parts have been assembled correctly.
• If your machine may have shut off due to overheating allow
your machine to rest until it has cooled down and then try
restarting operations.
• Contact your customer service center.
• Check whether there is a lot of pulp in the Auger Housing.
Trouble
If so, turn the juicer on to remove the excess pulp.
removing the
• Check whether there is any hard objects stuck in the Feeding
Feeding Chute.
Chute. The REV button may help dislodge it.
• Contact your customer service center.
• Use the REV button to dislodge any stuck pulp or produce.
The juicer stops
• Feed the juicer at a slower pace.
during operation.
• Cut your produce into smaller pieces.
• Contact your customer service center.
Leak from the • Check to see if the silicone sealing ring is in place at the
bottom of the
bottom center of the Auger Housing.
Auger Housing.
• Check to see if there is any damage to the silicone sealing ring.
• Feed the juicer at a slower pace.
• Contact your customer service center.
The Auger
• This is normal during operation and is designed to reduce strain
Housing moves
on the moving parts.
while juicing.

9. TROUBLESHOOTING

EN
13