Costway TW10052 Manual Del Usuario página 5

5
Place the Frame Cover with Sewn-on Skirt
Mesh (A) onto the trampoline main frame.
Between each section of the Frame Cover
pad, there is a built-in hole to secure the
pad to leg tube/enclosure leg socket.
08
6
Pull the Sewn-on Skirt Mesh down, align
the hole on both the Mesh and the Leg
Tube. Secure the Skirt Mesh to the leg
tube with Screws (D) and tighten them
with Screw Driver (E).
Assembly Instructions
(Safety Enclosure Net)
NOTE:
CHOKING HAZARD
-Small Parts. Not for children under 3 years.
ADULT ASSEMBLY REQUIRED
-Contains small parts, sharp points and sharp edges.
1
Insert the smaller diameter end of a
lower enclosure pole (G) into the
larger diameter end of an upper
enclosure pole (H) and align screw
holes. (You may need to slide the
preinstalled foam sleeves to gain
access to the ends of poles.)
EN
2
Insert screw (D) & tighten.
DO NOT OVERTIGHTEN!
Repeat steps 1 & 2 to assemble remaining
5 sets of upper (H) and lower (G) poles.
09