Therabody Recovery Pulse Arm Manual De Instrucciones página 4

EN
Getting started
Step 1
Put on your wearable device
1. Find the tag with the circular Therabody logo in your arm
sleeve. It should land in the center of the shoulder facing
outwards once the sleeve is properly placed (See image).
2. Slide your left or right arm into the sleeve, pulling up steadily
and gently.
3. Make sure the sleeve is placed correctly: circular Therabody
logo tag is centered on your shoulder facing outwards and
the battery pocket is easily accessible below the tag. The
Therabody logo should be on top of your forearm, next to the
outside part of your wrist.
4. Insert the battery in the pocket. Make sure the golden
connectors are facing down and the Therabody logo on the
battery faces outwards.
4