Therabody Recovery Pulse Arm Manual De Instrucciones página 7

Using the RecoveryPulse Arm
Vibration Device
1. Put the RecoveryPulse Arm Vibration Device
on either the right or left arm. You will know the
sleeve is on correctly when the logo is facing up
and out. (See Figure 1).
2. Once in a comfortable position, turn ON the
integrated vibration motors by firmly pressing
and holding the button for 2 seconds.
3. Press the button again to toggle through the
range of vibration frequencies. Adjust the
vibration frequency as needed.
4. To turn OFF the RecoveryPulse Arm Vibration
Device, firmly press and hold the button for
2 seconds.
Figure 1
EN
7