Joie roomie go Manual De Instrucciones página 7

!
To avoid hazards from the child's neck being caught on the top rail on
the side that is next to the adult bed, the top rail must not be higher
than the adult bed mattress.
!
To avoid the risk of your child being strangled the attachment system to
the adult's bed shall always be kept away from and out of the crib.
!
The product must always be placed on a horizontal surface.
!
Young children should not be allowed to play unsupervised in the vicin-
ity of the crib.
!
Do not use the product without the frame.
!
Keep the fixing straps out of reach of children.
!
Do not use more than one mattress in the cot.
!
Only use the mattress sold with this crib, do not add a second mattress
on this one, suffocation hazards.
!
When not attached to the bed, the crib can be inclined by a maximum
of 4 positions between one leg support and the other.
!
When in the "Bedside sleeper Configuration" (fastened to the bed), the
crib must never be inclined.
!
All assembly fittings should always be tightened properly and that care
should be taken that no screws are loose, because a child could trap
parts of the body or clothing (e.g., strings, necklaces, ribbons for ba-
bies´ dummies, etc), which would pose a risk of strangulation.
!
The mattress of the adult´s bed shall be aligned to or above the height
of the drop side in the middle position.
!
To prevent a suffocation hazard from entrapment, the bedside sleeper
shall be properly secured to the adult bed using the attachment system.
11
Bedside Sleeper Assembly
see images -
1 7
Please read all the instructions in this manual before setting up and using this product.
Please make sure the retractable feet of crib extend forward when using the product, see fig
Height Adjustment
see images -
8 12
!
The crib can be adjusted to different height positions.
!
The crib can be inclined with a maximum variance of 4 positions between one leg and the other (for
example: the right leg in position 5 and the left leg in position 1, see fig.
!
The head of the child should always be positioned on the highest side.
! It only be applicable to cradle state, but not to bedside sleeper state.
Use Wheels
see images -
13 14
At this point the crib is ready to be used.
!
Do not use the crib with adjustable feet partially or totally retracted. The correct position for use is illustrated
in figure. 5 6 In the case of accidental knocks against adjustable feet, return them to the correct position
bylifting the crib slightly.
Use Bedside Sleeper
see images -
15 29
-
1.Press the button 15 1 to drop the side down
!
When used in bedside sleeper configuration, only adjust the drop side near the bed to the middle position,
the other drop side must be in the highest position.
2.Position next to bed 17 , Connect Buckle to roomie go
20 21
adjuster buckle , then pull straps tight .
!
During fixing the crib to the parent's bed, the feet of the crib can be retracted inward by pressing the folding
button to closer the parent's bed. 18 If you want the feet extend outward, only need to lift the feet off the
parent's bed, they can extend outward automatically.
3.Ensure no gap between parent's mattress and roomie go
parents' mattress and the drop side in the middle position is 2cm
!
See figs 24 & 25 & 26 & 27 for incorrect installation.
4.The type of adult bed which can be used with bedside sleeper is slatted bed frame and box / divan bed
frame, the dimensions of adult bed shown on fig.
!
Check to make sure that the crib in the bedside sleeper mode does not interfere with the parent's bed.
!
During use, make sure that the parent's bed sheets, blankets etc. Do not enter and cover the interior of the
crib.
!
In the bedside sleeper mode the 2 legs of the crib should always be adjusted to the same height.
!
Before every use always check to make sure that there is no space between the parent's mattress and the
side of the crib. If there is, pull the belts firmly to tighten until there's no space and the permitted condition of
use has been restored.
.
5 6
).
11 12
11 12
11 12
-
15 2.
19 then loop strap around bed frame and connect to
22
. The maximum height difference between the
23 .
28 & 29
12