Descargar Imprimir esta página

Qilive Q.5678 Manual De Instrucciones página 7

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
2. TECHNICAL SPECIFICATIONS
Voltage:
Power consumption:
Temperature range:
Operating temperature:
Operating humidity:
Oil capacity :
Protection Class:
* 2.5L (chip capacity: 1 Kg) , 3L (chip capacity: 0.8 Kg)
3. PRODUCT DESCRIPTION
1. THERMOSTAT dial
2. ON/OFF switch
3. HEATING indicator light
4. TEMPERATURE indicator light
5. LID OPEN button
6. Frying basket with foldable handle
4. BEFORE FIRST USE
1.
Unpack the appliance and all parts.
2.
Make sure the appliance is not damaged and that there are no missing accessories.
Contact our after-sales service if there any missing or damaged parts.
3.
Clean the appliance and all accessories (see "CLEANING AND CARE" in section 6).
5. OPERATING INSTRUCTONS
5.1. USING THE DEEP FRYER
1.
Make sure that the ON/OFF switch (2) is set to the off position "O" and the arrow on
THERMOSTAT dial (1) is pointing to the off position "0".
2.
Press the LID OPEN button (5) and lift up the lid. Press the button on the frying
basket (6) handle to extend the handle when cooking or fold away the handle after
cooking. Remove the frying basket (6).
3.
Pour the appropriate amount of oil into the oil tank (10) and close the lid (7).
Note: The oil in the tank must not be lower than the minimum line or higher
than the maximum line.
4.
Plug the appliance into the mains socket. The red HEATING and green
TEMPERATURE indicator lights (3/4) will turn on.
Note: If the green TEMERATURE indicator light (4) does not turn on, the oil
tank (10) is incorrectly positioned in the base (11). Check and adjust until the
light turns on.
230 V ~ 50 Hz
1800 W
0°C -190 °C
5 °C-40 °C
≤80 %
2.5 L*
I
7. Lid
8. Window
9. Filter
10. Oil tank
11. Base
7
EN

Publicidad

loading