Descargar Imprimir esta página

Qilive Q.5678 Manual De Instrucciones página 9

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
Note: Do not scrape the oil tank, as this may cause it to malfunction or damage the
parts. Follow the steps below to clean the appliance:
Before first use
Boil water in the oil tank to remove any manufacturing residue, and then pour away the
boiled water. Wipe the oil tank dry, ensure no water remains in the tank.
Cleaning after each use
1.
Filter the oil if you are to use it again. Remove old oil into a sealable container and
dispose of it according to local household waste regulations.
2.
Remove and wash the frying basket and oil container in warm soapy water with a
soft cloth. Soak to remove stubborn stains.
3.
Wipe the base with a damp cloth moistened with soapy water.
4.
Allow all parts to dry completely before using the appliance.
Cleaning the filter
The filter should be checked regularly and cleaned when dirty. Pull the filter (9) out from
the back of the lid and wash in warm soapy water. Rinse and dry thoroughly.
7. GUARANTEES AND LIMITATIONS OF
LIABILITY
This product is guaranteed for a period of 36 months (including the legal guarantee of
24 months as defined by local law as well as a commercial guarantee of 12 additional
months offered by the brand) from the date of purchase, against any failure resulting
from a manufacturing or material defect.
This guarantee does not cover damage resulting from a faulty installation, incorrect use,
or normal wear and tear.More specifically, the guarantee does not cover:
Damage or problems caused by incorrect use, accidents, modifications or an
electrical connection with the wrong current or voltage.
Products that have been modified or whose tamper evident seal or serial number
has been damaged, altered, removed or rusted.
Replaceable batteries and accessories are guaranteed for 6 months.
Battery failure, as a result of over-charging or non-compliance with the safety
instructions set out in the manual
Cosmetic damage, including scratches, bumps and any other element.
Damage caused by any servicing operations carried out by non-authorised persons.
Faults caused by normal wear and tear or the normal ageing of the product
Software updates as a consequence of changes to network settings
Product failure resulting from the use of third party software to modify, change or
adapt the product as supplied
Product failure resulting from its use without manufacturer-approved accessories
Rusted products
The manufacturer is not liable for the loss of data stored on the hard drive. Similarly,
the manufacturer is not required to check that SIM/SD cards have been removed from
returned products.
Repaired or replaced products may include new and/or repackaged hardware and
components.
9
EN

Publicidad

loading