Publicidad
Idiomas disponibles
Idiomas disponibles
Airfusion Aria Hugger Installation Instructions
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and
follow all instructions before assembly, installation and use of this ceiling fan. Please keep instructions for
future reference.
Read and Save These Instructions
This product conforms to UL standard 507
1.
WARNING -To avoid possible electrical shock, before installing or servicing your fan, disconnect the
power by turning off the circuit breaker of the fuse box to the outlet box.
2.
WARNING - To reduce the risk of fire, electric shock, or personal injury, mount to outlet box marked
"acceptable for fan
outlet box and/or support directly from building structure. Most outlet boxes commonly used for the
support of luminaries may not be acceptable for fan support and may need to be replaced. Consult a
qualified electrician if in doubt.
3.
Suitable for use with solid-state speed controls
4.
WARNING - To reduce the risk of personal injury, do not bend the blade brackets when installing the
blade brackets balancing the blades, or cleaning the fan. Do not insert foreign objects in between rotating
fan blades.
5.
CAUTIONS - All wiring must be in accordance with the National Electrical Code (ANSI/NFPA 70) and
local electrical codes.
6.
To reduce the risk of injury to person, the fan must be mounted with a minimum of 7 feet clearance from
the bottom edge of the blades to the floor.
7.
After marking electrical connections, spliced conductors should be turned upward and pushed carefully
up into the outlet box. The wires should be spread apart with the grounded conductor and the equipment-
grounding conductor on one side of the outlet box.
8.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to
part 15 of the FCC rules. These limits are to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and
if not installed and used in accordance with the instructions may cause harmful interference to radio
communications.
9.
CAUTION - To reduce the risk of electric shock, disconnect the electrical supply circuit to the fan before
installing light kit.
10. The light kit weight is 0.65kg.
1 | P a g e
CONGRATULATIONS ON YOUR PURCHASE
SAFETY PRECAUTIONS
and CSA STD. C22.2 NO.113.
support of 35 lbs (15.9 kg) or less" and use the
If you are unfamiliar with wiring, use a qualified electrician.
mounting screws provided with the
V 1 . 0 ( 0 7 / 2 0 2 1 )
Publicidad
