Publicidad
Idiomas disponibles
Idiomas disponibles
Airfusion Aria Hugger Installation Instructions
WARNING: To avoid possible electrical shock, be sure you have turned off the power at the main circuit panel.
Follow the steps below to connect the fan to your household wiring. Use the wire connecting nuts supplied
with your fan. Secure the connectors with electrical tape. Make sure there are no loose wire strands or
connections.
After connecting the wires, Turn the connecting nuts upward and push the wiring into the fan hanging
8.
canopy.
Carefully put the Receiver into the fan hanging canopy. Take care not to damage or loosen any of the
9.
wiring.
5 | P a g e
ELECTRICAL WIRING DIAGRAM
Fig. 8
Fig. 9
1.
Connect the household live
(black) to receiver input wire (black, AC IN L) as
shown in Fig. 8.
2.
Connect the household neutral supply wire
(white) to the receiver input wire (white, AC IN N).
Connect the household ground wire to the
3.
fan mounting bracket ground wire (green) and fan
body ground wire.
4.
Connect the receiver output wire (black, TO
MOTOR L) to motor live input wire (black, TO
MOTOR L).
5.
Connect the receiver output wire (white, TO
MOTOR N) to motor neutral input wire (white, TO
MOTOR N).
Connect the receiver output wire (blue, FOR
6.
LIGHT) to fan light live input wire (blue, FOR
LIGHT)
7.
Pull the metal safety cable on the security
hook, tight the safety cable (Fig.9)
V 1 . 0 ( 0 7 / 2 0 2 1 )
supply wire
Publicidad
