Publicidad
Idiomas disponibles
Idiomas disponibles
Airfusion Aria Hugger Installation Instructions
INSTALLING THE LED LIGHT KIT (FOR FAN WITH LIGHT Fig.12)
Attach the LED light kit to the lamp base and connect wires to the LED light kit via the quick connectors.
-
Secure the LED light kit on the lamp base by turning the LED light kit body clockwise. Take care not to
-
cross thread or twist and damage the wires.
INSTALLATION OF THE REMOTE CONTROL HOLDER (Fig. 13)
1. Locate a suitable wall or surface to
fix the remote control wall holder.
2. Remove the screw cover and install
the holder using the 2 screws and
re-install the screw cover. (Fig.13a).
3. Slide the remote into the holder.
(Fig. 13b).
7 | P a g e
Fig. 11
Fig. 13a
Fig. 12
Fig. 13b
V 1 . 0 ( 0 7 / 2 0 2 1 )
Publicidad
