Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
INSTRUCTIONS
1. Insert motor assembly onto base and snap
into place making sure the wire is not pro-
truding from top of base (some models may
already be attached. If so, please skip this
step)
2. Attach rear grill onto motor assembly and
secure with screw-on collar
3. Insert fan blade onto motor assembly shaft
(align grooves on fan blade with extensions
on post) and secure with screw-on knob.
Note: Knob tightens counter-clockwise.
4. Secure front grill onto rear grill with grill
connector ring (grooves on grill connector
ring should align on front and rear grills)
and snap into place. You can tighten or
loosen the front grill by turning the screw
on the connector ring.
OPERATING
INSTRUCTIONS
1. Place fan on flat surface and plug into
outlet.
2. Adjust fan head up or down by loosening
and then tightening tilt adjustment knob.
3. By simply pulling or pressing the oscilla-
tion knob, your fan can either turn from
side to side or stay in a fixed position.
For oscillation (turning) mode, make sure
oscillation knob is in the lower position.
For stationary (fixed) operation, make sure
oscillation knob is in the upper position.
4. On the base, press either "1" (low speed) or
"2" (high speed) depending on your prefer-
ence. Pressing "0" will turn the fan off.
CARE & CLEANING
This appliance requires little maintenance and
contains no user serviceable parts. Do not try
to fix it yourself. Refer it to qualified service
personnel if servicing is needed.
The fan is permanently lubricated and will not
4 English
require additional lubrication for the life of the
fan.
TO CLEAN: Before cleaning, turn fan off and
unplug from electrical outlet. Wipe off excess
dust with a lint-free cloth. To ensure adequate
air circulation to the motor, keep vents located
at the rear of the motor housing free from dust
accumulation. A vacuum cleaner hose can be
used to clean these vents. Do not immerse
fan in water or any other liquid. Disassemble
grilles and blade. Grilles and blade may be
cleaned with mild soap and water. Use a soft,
slightly damp cloth to wipe the remaining fan
parts. Do not allow water or any other liquid
to get into the motor housing or base. Reas-
semble fan after grilles and blade have dried
completely. Do not plug fan into electrical
outlet until it has been fully reassembled.
TO STORE: Make sure to disassemble and
clean the fan before storing. Retain the original
packaging for the purpose of storing the fan.
Always store fan in a dry place. Never store
it while it is still plugged in. Never wrap the
cord tightly around the fan, and do not put
any stress on the cord where it enters the fan
housing, as it could cause the cord to fray and
break.
WARRANTY
Length of Warranty
1 year from date of purchase
Within 1 year from date of purchase,
1) Return product to place of purchase
(if your dealer allows)
OR
2) Send product postage pre-paid to:
I.E.A.C.
3030 East Vernon Avenue
Vernon, California, USA 90058
Please include original dated receipt,
explanation of defect and return name
and address as well as a contact phone
number.
We will, within 10 days of receiving
your product, return a new or refur-
bished (at our discretion) product at NO
ADDITIONAL CHARGE.
We will also return your receipt. If prod-
uct is found to be in working condition,
we will return product postage collect.
PACK YOUR PRODUCT WELL!
We will not be responsible for damages
incurred as a result of improper packing.
Or contact us via e-mail at
customerservice@betterchefimpress.com
English 5
Publicidad
