Batavia MAXX Serie Manual De Usuario página 13

Maintenance
11.2
There are no inner parts of the tool which
need maintenance.
12. Technical data
Operating voltage: . . . 230 – 240 V~ 50 Hz
Nominal power: . . . . . . . . . . . . . 400 W
No load speed: . . . . . . . . . . . 1800 min
Weed brush diameter: . . . . . . . . 110 mm
Protection standard: . . . . . . . . . . . IPX0
Sound pressure level L
Uncertainty K : . . . . . . . . . . . . 3 dB(A)
pA
Sound power level L
Uncertainty K : . . . . . . . . . . . . 3 dB(A)
WA
Vibration
Main handle a : . . . . . . . . 2.245 m/s
h,M
Uncertainty K: . . . . . . . . . . . . .1.5 m/s
Auxiliary Handle a : . . . . . . . 1.770 m/s
h,B
Uncertainty K: . . . . . . . . . . . . .1.5 m/s
Protection class: . . . . . . . . . . . . . . . . II
Weight: . . . . . . . . . . . . . . . . . 1.85 kg
Vibration level
12.1
The declared vibration total value and the
declared noise emission values have been
measured in accordance with a standard
test method and may be used for compar-
ing one tool with another. The declared
vibration total value may also be used in a
preliminary assessment of exposure.
Warning!
The vibration and noise emission during
actual use of the power tool can differ from
the declared total value depending on the
ways in which the tool is used, in particular,
what kind of work piece is machined.
It is necessary to identify safety measured
to protect the operator that are based on an
estimation of exposure in the actual condi-
tions of use (taking account of all parts of
the operating cycle such as the times when
the tool is switched off and when it is run-
ning idle in addition to the trigger time)
Try to minimize the impact of vibration and
noise. Exemplary measures to reduce vibra-
tion exposure include wearing gloves while
using the tool, limiting working time, and
using accessories in good condition.
: . . . . . . 83 dB(A)
pA
: . . . . . . . 91 dB(A)
WA
13. Accessories – optionally
available
Nylon / Metal brush set. Item-No. 7064491
14. Disposal
Do not dispose of electric power
tools with domestic refuse.
The electric power tool is shipped
-1
in packaging to reduce transport damage.
This packaging is a raw material and as
such can either be reused or can be fed
back into the raw material cycle. The elec-
tric power tool and its accessories are
made from various materials such as met-
als and plastics. Take defective compo-
nents to a special refuse collection point.
2
Ask about these at your specialist shop or
local council.
2
2
15. EC-Declaration of conformity
2
We, the Batavia B.V., Weth. Wassebali-
estraat 6d, NL-7951 SN Staphorst, declare
by our own responsibility that the product
Electric weed sweeper, Item-No 7064490,
Model Nr. BT–EWS001 is according to the
basic requirements, which are defined in the
European Directives Electromagnetic Com-
patibility 2014/30/EU (EMC), 2006/42/EC
(Machinery), RoHS: 2011/65/EU and their
amendments. For the evaluation of con-
formity, the following harmonized standards
were consulted:
EN62841-1:2015
AfPS GS 2019:01 PAK
EN ISO 12100:2010
EN IEC 55014-1:2021
EN IEC 55014-2:2021
EN IEC 61000-3-2:2019+A1
EN61000-3-3:2013+A1+A2
Staphorst, 23 January 2023
Jin Min, QA Representative
Batavia B.V., Weth. Wassebaliestraat 6d,
7951 SN Staphorst, Netherlands
English
11