GB
MT
Cleaning/Maintenance
Leave any work not covered in this
manual to our Service Centre. Only
use original parts. There is a risk of
injury!
Cleaning
Clean and service the device regularly as
follows. This guarantees a long life for your
unit:
Do not jet water onto the
appliance and do not clean
it under lowing water. This
would result in the danger of
an electric shock and the ap-
pliance could be damaged.
•
Keep the ventilation slits, motor hous-
ing and handles on the equipment
clean. To do this, use a damp cloth or
brush.
Never use cleaning agents or solvents,
which can cause irreparable damage
to the unit.
Maintenance
The device is maintenance free.
Storage
•
Keep the device in the blade guard
supplied, dry and out of reach of chil-
dren.
•
Store the battery only in a partially
charged state. The state of charge
should be 40 – 60 % over a longer
storage period.
•
Store the device between 10° C and
25° C. During storage, avoid extreme
52
All manuals and user guides at all-guides.com
cold or heat so the battery does not
lose power.
•
During a longer storage period, check
the state of charge of the battery and
recharge if necessary roughly every
3 months.
Disposal and the
environment
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have inished with
them.
Machines do not belong with do-
mestic waste.
Do not dispose of the device
with the battery installed in
household waste, ire (risk of
explosion) or water. Damaged
batteries may damage the envi-
ronment and your health if toxic
fumes or liquids leak out.
•
Dispose of the equipment with the
battery discharged. Do not open the
equipment or the battery.
•
Dispose of the equipment in accord-
ance with the local regulations. Take
the equipment to a collection point,
where it will be recycled in an environ-
mentally friendly manner. For informa-
tion about this, ask your local waste
management company or our service
centre.
•
Defective units returned to us will be
disposed of for free.