Black and Decker BHOF04 Manual De Instrucciones página 11

SET UP & USE
OPERATING INSTRUCTIONS
Place the heater on a firm, level surface and plug the unit directly into a 120V AC
electrical outlet.
WARNING: Only operate heater in upright position.
Setting Temperature
Heater will start in the ON/OFF (0) position. This heater has 3 heat settings 500W (1);
1000W (2); 1500W (3).
Pull the chain to change to the different settings. Window on the back of the head of
the unit will indicate which setting is currently chosen.
INSTRUCTIONS TO USE AS WALL-MOUNTED
HEATER
Parts included: 4-plastic wall anchors and 4 wall hanging screws.
1. Mark where the holes will go on the wall, 1.3 inches apart (horizontal); 1.9 inches
apart (vertical).
0
①
②
③
1.3 inches
Page 11