Kicker KM60 Manual Del Propietário página 2

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Authorized KICKER Dealer:
Purchase Date:
Speaker Model Number:
The KICKER KM coaxial speakers are specifi cally designed for mounting in free-air applications. The
speakers do not require a sealed enclosure for optimum performance. It is important to isolate the sound
coming off the front of the driver from the sound radiating from the back of the driver. This isolation is
usually accomplished by using the driver in a factory speaker location, or in a location with a semi-isolated
rear chamber.
SPECIFICATIONS
Model:
Woofer [in, mm]
Tweeter [in,mm]
Rated Impedance [Ω]
Peak Power Handling [ Watts]
Continuous Power Handling [Watts RMS]
Sensitivity [1W, 1m]
Frequency Response [Hz]
Mounting Hole Diameter [in, mm]
Mounting Depth [in, mm]
Grilles
Tweeter Magnet Material
Tweeter Dome Material
Tweeter Design
Woofer Cone Material
Woofer Surround Material
LOCATION
The sound produced by the KM coaxials is directional. Find the best location for stereophonic sound. If
necessary, add more KM coaxial speakers to the system to help distribute and balance the sound-stage.
After determining the best mounting locations, carefully check the areas where the mounting hardware will
be placed.
2
2014 KM604W Coax Rev B.indd 2
2014 KM604W Coax Rev B.indd 2
KM Coaxial Speakers
Owner's Manual
KM60
6-1/2, 160
1/2, 13
4
150
50
90
35-21k
5-3/16, 132
2-1/2, 62
Yes
Neodymium
PEI
Balanced Dome
Polypropylene
Santoprene
11/7/2013 3:48:03 PM
11/7/2013 3:48:03 PM

Publicidad

Tabla de contenido
loading

Tabla de contenido