Medisana MC 820 Instrucciones De Manejo página 31

Respaldo de masaje shiatsu
Ocultar thumbs Ver también para MC 820:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 59
3.1
Usage
3.2
Operation
The use of the shiatsu massage seat cover will improve your wellbeing after a
stressful day. The massage effect is particularly useful for treating tense muscles
and tired tissue. The unit provides pleasant relaxation for overcoming everyday
stress. The massaging can improve your well-being, and is also useful in the
sport and fitness areas.
Start-up
• Before using the device for the first time, both transport locks must be
re-moved from the back of the backrest at the top and bottom (see
illustration at the front of the Instruction Manual). Be sure to observe the
safety information (see chapter 1 Safety instruction, sub-heading before
using the device and the according illustration at the front of this
Instruction Manual).
• Place the massage seat cover on a high chair or armchair and attach it to this
by means of the fasteners
supported over its entire area and has a sufficiently high backrest.
• Insert plug
into the mains socket. Ensure that the power supply is easily
accessible.
• Take a seat on the shiatsu massage seat cover and familiarise yourself with
the functions.
• Sit comfortably and upright. Ensure you sit centered and such that the
massage heads
can move to the left and right of your spinal column.
Operating the unit
The MC 820 shiatsu seat cover has five functions for an effective massage:
fingertip massage (Shiatsu massage), rolling massage, spot massage, vibration
massage and heat. The heat function can be used together with the shiatsu or
rolling massage in the back, during which the neck massage and the vibration
massage in the seat can also be activated. Do not use the unit for more than
15 minutes at a time. After approx. 15 minutes, the unit will switch off auto-
matically. Always allow the unit to cool down fully before you use it again.
Buttons on the control unit
Use the buttons on control pad
Switch on the device by pressing O
device starts with standby mode. If no other button is pressed, the device turns
off after 15 minutes automatically.
Demo button
You may activate demo function with or without pressing On/Off button
before. Press the Demo button
introduction of different back setting with different functions.
3 Operating
on the back. Ensure that the seat cover is
to operate the massage seat cover:
n/Off button
. The LED illuminates.
, the device starts automatically with
GB
The
17

Publicidad

Tabla de contenido
loading

Tabla de contenido