Operating - Medisana MC 820 Instrucciones De Manejo

Respaldo de masaje shiatsu
Ocultar thumbs Ver también para MC 820:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 59
GB

3 Operating

18
First massages in neck/shoulder are presented by rotating neck/shoulder
massage heads
, to be added directly by full back region massages. The
rotating back massage heads
to the entire top. Simultaneously heat in the back and vibration in the seat are
activated, while intensity of vibration is set on highest level. The LEDs show the
current massage regions and functions. The device will stop once all functions
worked.
Neck button
Switch on the device by pressing O
Neck button
is for the neck/shoulder reversible kneading massage. Press this
button once, left massage head
head
is kneading clockwise. Press it a second time, directions change. Press
button
a third time, neck massage stops.
( ▼ ▲ )
Adjust buttons
Activate the neck massage function by pressing the neck button
Adjust buttons
to position the height level of the neck massage heads
Press and hold the ▼ or ▲ button until the favoured position is reached.
Shiatsu Massage button
Switch on the device by pressing O
function by pressing the Shiatsu massage button
to massage with the back massage button (
Lower button
(lower back)
The Shiatsu massage heads
in a circular motion. The reversal of the direction of rotation takes place when
the respective end positions are reached.
Upper button
(upper back)
The Shiatsu massage heads
in a circular motion. The reversal of the direction of rotation takes place when
the respective end positions are reached.
Full button
(full back)
The Shiatsu massage heads
the backrest, up to the shoulder area, massaging the back in a circular motion
whilst doing so. Once the uppermost position has been reached, the direction
of rotation of the massaging heads is reversed. The heads then travel down to
the base of the backrest. Once the heads reach this point, the direction of
rotation is reversed again and then travel up the back again.
Press the button
again to de-activate the Shiatsu massage function.
move from the entire bottom (start position)
n/Off button
.
is kneading counterclockwise; right massage
n/Off button
.
Activate the Shiatsu massage
. Select the region you wish
/
/
travel up and down the lower half of the back
travel up and down the upper half of the back
move from the "Park" position at the base of
. Use the
.
).

Publicidad

Tabla de contenido
loading

Tabla de contenido