Axxess AXDIS-FD3 Instrucciones De Instalación página 8

Idiomas disponibles

Resetting the AXDIS-FD3

1. The Blue reset button is located inside the interface, between the two connectors.

The button is accessible outside the interface, no need to open the interface.

2. Press and hold the reset button for two seconds, and then let go to reset the interface.

3. Refer to the Programming section from this point.

AxxessInterfaces.com

TROUBLESHOOTING

AXDIS-FD3

I N S TA L L AT I O N I N S T R U C T I O N S

Having difficulties? We're here to help.

Contact our Tech Support line at:

386-257-1187

Or via email at:

techsupport@metra-autosound.com

Tech Support Hours (Eastern Standard Time)

Monday - Friday: 9:00 AM - 7:00 PM

Saturday: 10:00 AM - 7:00 PM

Sunday: 10:00 AM - 4:00 PM

NOWLEDGE IS

Enhance your installation and fabrication skills by

enrolling in the most recognized and respected

mobile electronics school in our industry.

Log onto www.installerinstitute.edu or call

386-672-5771 for more information and take steps

toward a better tomorrow.

Metra recommends MECP

certified technicians

REV. 2/15/23 INSTAXDIS-FD3

OWER