Zizito CASPAR Manual De Instrucciones página 15

USAGE 4 – TO INSTALL THE BUMPER BAR
1. Assemble: Insert the two ends of the bumper bar into bumper bar slots on the
frame, until they "click" together.
2. Disassemble: Press the bumper bar detaching button, at the same time pull
the bumper bar out of the slots. The bumper bar is disassembled.
WARNING! MAKE SURE THE BUMPER BAR IS INSTALLED SUCCSESSFUL-
LY BEFORE USING!
USAGE 5 – TO USE 5-POINT HARNESS
1. Assemble: Press the round button in the middle of the buckle, then the safety
belt is released.
2. Disassemble: Insert the wrist plastic part intro shoulder plastic part, then insert
these two together into the crotch buckle plastic holder. The safety belt is as-
sembled.
3. Adjustment: Lengthen or shorten the shoulder belt – the length is adjusted.
15