Please read the operating handbook in your vehicle to inform yourself about the
basics concerning children's seats in vehicles.
DO NOT place this baby seat on seats with front airbags.
This baby car seat can only be installed using a three-point vehicle belt.
The baby car seat must be Installed rearwards facing (in the direction opposite
the one in which you are traveling).
Step 1. Adjust the handle to the
forward position (Fig.1). Put the seat
in car's seat. Handle must be firmly
against the backrest of car's seat.
Step 3. Place the diagonal belt in the
diagonal belt guide at the back of the
seat (Fig.3)
SECURING THE INFANT CARRIER
1.
3.
5.
Step 2. Slide the lap belt of the Vehi-
cle's 3-point seat belt through both Lap
belt guides. Let the tongue plate snap
in the belt lock with a clearly audible
"click". Pull the shoulder belt in narrow
direction to tighten thee lap belt. Check
to make sure the tongue plate is locked
by pulling on the belt (Fig.2)
Step 4. Tighten the vehicle's own
3-point seat belt by pulling hard on the
positions showed in fig. 3 and fig. 4
Step 5. The satisfactory position of the
adult safety-belt buckle relative to the
child car seat is as the Fig 5. You can
contact the child car seat manufacturer
if in doubt about this point.
2.
4.
15