Metra 95-7378B Instrucciones De Instalación página 2

1. Unclip and slide the top of the center
console back slightly. (Figure A)
2. Unclip and remove the panel on the
end of the passenger side of the dash,
then remove (1) Phillips screw exposed.
(Figure B)
3. Unclip and remove the dash panel above
the glove box. (Figure C)
2
DASH DISASSEMBLY
(Figure A)
(Figure B)
(Figure C)
4. Remove (2) Phillips screws securing the
radio display and a/c vent panel, then
unclip and remove the panel. (Figure D)
5. Remove (4) Phillips screws securing the
radio. Slide the radio out, then unplug
and remove the radio. (Figure E)
Continue to Kit Preparation
(Figure D)
(Figure E)
|
386.257.1187 MetraOnline.com