HEIDENHAIN EIB 8000 Modo De Empleo página 21

1.1.4 Storage and distribution of the
documentation
These instructions must be kept in the immediate vicinity
of the workplace and must be available to all personnel
at all times. The operating company must inform the
personnel where these instructions are kept. If the
instructions have become illegible, the operating company
must obtain a new copy from the manufacturer.
If the product is handed over or sold to a third party, the
following documents must be given to the new owner:
Addendum, if supplied
Operating Instructions
1.1.5 Target group for the instructions
The Operating Instructions must be read and observed by
every person who performs any of the following tasks:
Mounting
Installation
Commissioning
Setup, programming and operation
Service, cleaning and maintenance
Troubleshooting
Removal
Disposal
HEIDENHAIN | EIB 8000 | 09/2018
1.1.6 Notes in this documentation
Safety precautions
Precautionary statements warn of hazards in handling
the product and provide information on their prevention.
Precautionary statements are classified by hazard severity
and divided into the following groups:
DANGER
Danger indicates hazards for persons. If you do not
follow the avoidance instructions, the hazard
in death or severe injury.
WARNING
Warning indicates hazards for persons. If you do not
follow the avoidance instructions, the hazard
result in death or serious injury.
CAUTION
Caution indicates hazards for persons. If you do not
follow the avoidance instructions, the hazard
result in minor or moderate injury.
NOTICE
Notice indicates danger to material or data. If you do
not follow the avoidance instructions, the hazard
result in things other than personal injury, such as
property damage.
Informational notes
Informational notes ensure reliable and efficient operation
of the product. Informational notes are divided into the
following groups:
The information symbol indicates a tip.
A tip provides additional or supplementary
information.
The gear symbol indicates that the function
described depends on the machine,
Your machine must feature a certain
software or hardware option
The behavior of the functions depends on
the configurable machine settings
The book symbol represents a
reference to external documentation, e.g. the
documentation of your machine tool builder or
other supplier.
will result
could
could
could
e.g.
cross
23