HEIDENHAIN EIB 8000 Modo De Empleo página 36

Digital In
Digital In Rear panel:
Input voltage U
Reset,In
range
Remote reset and Digital In
(+ measured against –):
Min. –0.5 V, max. +14.0 V
U
Reset,In,Lo
Reset, Digital In = 0:
Min. –0.5 V; max. +0.8 V
U
Reset,In,Hi
Reset, Digital In = 1:
Min. +2.0 V; max. +14.0 V
Current I , I
Reset Digital
consumption
Analog input
ANALOG IN Rear panel:
Input voltage U
Analog,In
range
Analog Auxiliary In+ measured
against Analog Auxiliary In–:
Min. –10.0 V; max. +10.0 V
Current I
Analog,In
consumption
Supply voltage U
Analog,Out
(output)
Vcc_A_AUX measured against
GND_A_AUX : Min. +4.5 V;
max. +5.2 V
I
Analog,Out
Max. +2.5 mA
Ambient conditions
Operating 0 °C to 45 °C, no condensation
temperature
Storage –20 °C to 70 °C, no condensation
temperature
Altitude < 5000 m above sea level
General information
Directives EMC Directive 2014/30/EU
Low Voltage Directive 2014/35/EU
Pollution degree 2
Protection IP20
EN 60529
Dimensions
See dimension drawings starting from "D", Page 151.
All dimensions are in millimeters [mm].
38
D-sub, male 25-pin
U
Digital,In
, U
Digital,In,Lo
, U
Digital,In,Hi
: Max. 10.0 mA
D-sub, female 15-pin
: 0.2 mA
HEIDENHAIN | EIB 8000 | 09/2018