hillvert HT-FORBES-7000 Manual De Instrucciones página 45

Part
number
1 Main frame
4 Split pin
Spring and depth
39
adjustment lever
41 M8 screw
47 Top part of the handle
48 M16 bolt
a) Attach the lower part of the handle (49) to the main frame (1).
b) Attach the upper part of the handle (47) to the lower part (49), secure
the connection with the screw (48) and clamping lever (53).
c) Put the depth adjustment lever (39) in the right place (as shown in the
figure) and secure the connection with the screw (41) and the spring
(39), then fasten the other side of the spring with the pin (4) to the
lever (39).
d) Install the starter cable guide (69) to the main frame (1) and tighten
securely with the bolt (68).
Step 2: Chain assembly
HT-FORBES-7000 | HT-FORBES-15000
Description Part
number
49 Lower part of the handle
53 Clamping lever
67 M8x45 hexagon bolt
68 M8x20 hexagon bolt
69 Starter cable guide
Description