Publicidad
ASSEMBLY
Power Nozzle
Raised Area
Portion en relief
Área elevada
Up and In
Vers le haut et à l'intérieur
H
acia arriba y hacia dentro
Wands
➢ ➢ Slide wands together until wand button
snaps into place
➢ ➢ Insert wands into POWER NOZZLE until
the wand button snaps into the grooved
slot.
➢ ➢ Connect POWER NOZZLE plug and
cord as shown.
➢ ➢ Do not force.
➢ ➢ Raised area of plug must face toward
hand.
➢ ➢ If hard to install, turn the plug over and
try again.
To Remove:
➢ Unplug the cord.
➢ Steady POWER NOZZLE with foot and
turn wand counter-clockwise until lock
button disappears.
➢ Pull wands out of POWER NOZZLE.
- 14 -
Publicidad
