EAS ELECTRIC EFMV2 Serie Manual De Instrucciones página 47

Other features
Default Setting
When the air conditioner restarts after
a power failure, it will default to the
factory settings: (AUTO mode, AUTO
fan, 24°C (76°F)). This may cause
inconsistencies on the remote control
and unit panel. Use your remote
control to update the status.
Auto-Restart (some models)
In case of power failure, the system
will immediately stop. When power
returns, the Operation light on the
indoor unit will flash. To restart the
unit, press the ON/OFF button on the
remote control. If the system has an
auto restart function, the unit will
restart using the same settings.
Louver Angle Memory Function (some
models)
Some models are designed with a
louver angle memory function. When
the unit restarts after a power failure,
the angle of the horizontal louvers will
automatically return to the previous
position. The angle of the horizontal
louver should not be set too small as
condensation may form and drip into
the machine. To reset the louver, press
the manual button, which will reset the
horizontal louver settings.
Refrigerant Leak
(some models)
The indoor unit will automatically
display "EC" or "EL0C" or flash LEDS
(model dependent) when it detects
refrigerant leakage.
10
Detection System
V.1