Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
Harmful and/or hot/cold conveyed media, lubricants and fuels
Hazardous for persons and the environment!
Collect and dispose of rinsing medium and any residual media.
Wear protective clothing and a protective mask.
Observe legal regulations regarding the disposal of harmful media.
Risk of injury if maintenance work is done incorrectly!
Incorrect maintenance can lead to serious injury and considerable material damage.
Before the start of work, ensure there is sufficient room for doing the work.
Ensure the space around the work is tidy and clean! Parts and tools in loose piles or lying around
are hazard sources.
If parts have been removed, take care to assemble correctly and re-install all attachment items.
Before putting back into service, ensure:
All maintenance work has been carried out and completed.
There are no persons in the hazard area.
All covers and safety devices are installed and operating correctly.
CAUTION
Cold/hot pipelines and/or safety valves.
Risk of injury due to thermal influences!
Insulate the safety valve.
Attach warning signs.
Medium escaping at high speed and high/low temperature.
Risk of injury!
Wear the prescribed protective equipment
NOTICE
Impermissible stress due to operating conditions and extensions / added structures.
Valve body leaking or broken!
Provide suitable support.
Additional loads, such as traffic, wind or earthquakes, are not explicitly taken into account by
default and require separate sizing.
Condensation in air conditioning, cooling and refrigeration plants.
Icing!
Blocking of the actuation mechanism!
Damage due to corrosion!
Insulate the safety valve diffusion-tight
Improper mounting.
Damage to the safety valve!
Remove cover caps before mounting.
Clean the sealing surfaces.
Protect the body against hammering.
Painting of safety valves and pipelines.
Impairment of the function of the safety valve / loss of information!
Protect stem, plastic parts and type plate against the application of paint.
Exceeding the maximum permissible operating conditions.
Damage to the safety valve!
The maximum permissible working pressure must not be exceeded, and the minimum and
maximum allowable working temperatures must be observed.
Particles and other contaminants in the conveyed medium.
Damage to the safety valve / leak!
Remove particles/contaminants from the conveyed medium.
It is recommended to install strainers / dirt filters in the pipework system.
Operating instructions
herose.com
15
Publicidad
